Free HueForge Alternatives in 2026, and Which One Fits Your Printer
Chroma Canvas, Kromacut, AutoForge and the quick browser tools: what each exports, whether it uses TD values, and how to print them with or without an AMS.
HueForge is still the tool most filament paintings start in, but it isn’t free. On 9 November 2026 the HueForge shop (opens in a new tab) listed the personal lifetime licence at $24 USD, with commercial licences on top. If you only want to try the technique, or you print on a Bambu Lab machine and want something quicker, there are now several free tools that do the same basic job: turn an image into a flat, layered model where a few filament colours stacked at set heights blend into a picture.
We looked at the free options people actually use in 2026, what each one exports, and which kind of printer it suits. None of these are paid add-ons, and none of them need a HueForge licence.
What a HueForge alternative needs to do
Filament painting works because thin layers of filament let some light through. A few layers of white over black read as grey, a few more read as white. HueForge models that with each filament’s TD (transmission distance) value, so it can predict how colours blend before you print. A useful alternative has to do three things: build the layered model, tell you where to swap filament, and give you a preview you can trust. The better ones also let you enter your own filaments and their TD values, which matters more than anything else for how close the print gets to the screen. We go into that in the HueForge filaments I wish I had bought first.
The free tools at a glance
| Tool | Runs where | Exports | Uses TD values | Best for |
|---|---|---|---|---|
| MakerLab Chroma Canvas | MakerWorld, in the browser, account needed | 3MF with the colour plan | No colour matching to your own filaments | Bambu Lab owners trying it for the first time |
| Kromacut | Browser, Windows, macOS, Linux | STL or colour-aware 3MF, plus a swap plan | Yes, with its own calibration | The most control for free |
| AutoForge | Your own computer (local web UI or command line) | STL, swap instructions, HueForge project file | Yes | Letting an optimiser choose colours and swaps |
| PrintNexus filament painting | Browser, nothing uploaded | 3MF set up for Bambu Studio, OrcaSlicer or PrusaSlicer, or a plain 3MF and swap list | Yes, for custom filaments | Quick prints with the swaps already in the file |
| PrintPal Filament Painter | Browser, no sign-up | OBJ with colours, or STL, plus a print guide | Colour only | A fast first try on any printer |
MakerLab Chroma Canvas: the easy option for Bambu Lab printers
Chroma Canvas is Bambu Lab’s own take on filament painting, inside MakerWorld’s MakerLab. Bambu Lab announced it on 25 November 2025 (opens in a new tab) and credited HueForge as the inspiration. You upload a picture and try colour palettes the way you’d pick a filter on your phone. Its standout feature is AI segmentation, which splits an image into two or three regions so the subject and the background can each get their own palette. There are small helpers too: cropping, rounded corners and a hole punch for bookmarks and charms.
It’s free to use with a MakerWorld account, according to SkipTheCAD’s tool listing (opens in a new tab) , and the download is a 3MF that already contains the colour-change plan. The trade-off is control. Early users on the Bambu forum pointed out that it doesn’t do lithophanes and doesn’t match colours to your own measured filaments, and one tester found that very thin results could be fragile. A tip from the same thread: use four or more colours, 20 to 30 layers in total, and at least four layers of black at the bottom.
Open Chroma Canvas on MakerWorld (opens in a new tab)
Kromacut: the most complete free alternative
Kromacut (opens in a new tab) is a free, open-source app (AGPL-3.0) that runs in the browser at kromacut.com (opens in a new tab) or as a desktop app for Windows, macOS and Linux. It’s the closest thing to HueForge on this list. You can edit and reduce the colours of your image, then either set the layers yourself or use Auto-paint, which plans a filament stack from the colours you own. It has a calibration workflow for measuring your filaments, a 3D layer preview, and a Flat Paint mode for bookmarks and coasters.
For export you get an STL plus a copyable swap plan, or a colour-aware 3MF. Kromacut’s export guide (opens in a new tab) recommends one wall loop and 100% infill, a constant layer height matching the model, and going by the layer number in its swap plan rather than a height that only looks right. It’s still under active development, with updates pushed to GitHub in November 2026.
AutoForge: let the optimiser pick the colours
AutoForge (opens in a new tab) takes a different approach. Instead of you choosing which filament goes where, it runs an optimisation that assigns a filament to each layer and works out the height map, then writes the STL and the swap instructions. It can also save a project file you can open in HueForge. You can cap the number of colours and swaps, which is handy if you print without an AMS and don’t want twenty spool changes.
It runs on your own computer, either as a local web UI or from the command line, and it’s fastest with a graphics card (NVIDIA, AMD on Linux, or Apple Silicon), though it also works more slowly on the CPU. The web UI can import a HueForge filament library if you already have one, and it can search filamentcolors.xyz (opens in a new tab) for filaments with a measured TD. The software is free under a non-commercial licence (CC BY-NC-SA 4.0), and its author says the prints you make with it are yours to use however you like, including selling them.
PrintNexus and PrintPal: quick browser tools
If you just want to see whether filament painting is for you, two browser tools need no account and process the image on your own device. PrintNexus’s free filament painting tool (opens in a new tab) , launched on 26 October 2026, lets you pick filaments, add your own with a custom colour and TD, check the preview, and download a 3MF that already has the swaps set for Bambu Studio, OrcaSlicer or PrusaSlicer. There’s also a plain 3MF and swap list for any other slicer.
The PrintPal Filament Painter (opens in a new tab) is the simplest of the lot. You set your colour layers, preview the blend and download an OBJ with colours or a plain STL, with a print guide listing the swap heights. It sets filaments by colour only, without TD values, so treat its preview as a rough guide.
If you want a colour lithophane instead
Filament paintings are viewed like posters. A colour lithophane is lit from behind, which is a different job, and a couple of free tools focus on it. PIXEstL (opens in a new tab) is a free, MIT-licensed Java program for colour lithophanes and pixel art, built around a palette of your own filaments. PixelSculpt (opens in a new tab) does colour lithophanes in the browser, with TD-based simulation, a backlit 3D preview, filament presets, and a manual mode that gives you pause-at-layer instructions for hand swaps. It’s labelled as a beta.
Printing them without an AMS
Every tool here works on a single-spool printer. The colours come from swapping filament at set layers, so you add a pause at each swap height and change the spool by hand. Kromacut and PrintPal give you a swap plan to follow, AutoForge writes swap instructions, and PrintNexus’s OrcaSlicer 3MF includes the pauses already. Whatever you use, match the first layer and layer height in your slicer to the tool’s settings, or the swaps won’t land where they should. We walk through the whole process in how to print HueForge without an AMS in Bambu Studio, and it applies to these files too.
So which one should you use?
- You print on a Bambu Lab machine and want a first result today: Chroma Canvas.
- You want HueForge-style control without paying: Kromacut.
- You have a decent graphics card and want the colours chosen for you: AutoForge.
- You want to try it in five minutes without an account: PrintNexus or PrintPal.
- You’re making something to hang in a window or a lamp: PixelSculpt or PIXEstL.
If you get hooked, HueForge is still worth a look for its colour matching and the many designs people share for it. And if you’re sharing what you print, we wrote about where a filament painting stops being click-print and starts being your own work in original 3D printing versus click-print.
Verification
Sources
- HueForge Software (opens in a new tab) — HueForge
- Chroma Canvas Is Here (opens in a new tab) — Bambu Lab Community Forum
- MakerLab Chroma Canvas (opens in a new tab) — SkipTheCAD
- Kromacut (opens in a new tab) — GitHub
- Generating and exporting output (opens in a new tab) — Kromacut Docs
- AutoForge (opens in a new tab) — GitHub
- Free HueForge Alternative: Filament Painting Online (opens in a new tab) — PrintNexus
- Free Online Filament Painter (opens in a new tab) — PrintPal
- PIXEstL (opens in a new tab) — GitHub
- PixelSculpt (opens in a new tab) — PixelSculpt
Published 9 November 2026